隨機畫家 插件！

:D上菜：【運行在SU 7.0版本】
插件： 桌面.rar (4.09 KB, 下載次數: 456)

2009-5-15 15:45 上傳

點擊文件名下載附件
rar

運行載體：（下載地址用網頁打開）
http://sourceforge.net/project/downloading.php?group_id=240585&filename=wxSU-0-3-0-mswin.exe&a=45374274（安裝版）
http://sourceforge.net/project/downloading.php?group_id=240585&filename=wxSU-0-3-0.zip&a=53953606（復制版）
實例貼圖：
High_rise_textures.zip (165.67 KB, 下載次數: 867)

2009-4-16 20:38 上傳

點擊文件名下載附件
zip

實例模型：
High_rises_random_paint.zip (414.18 KB, 下載次數: 905)

2009-4-16 20:38 上傳

點擊文件名下載附件
zip

本貼附件下載

附件可能為分卷壓縮包，需全部下載并放置于同一個文件夾內才可以解壓哦~

High_rise_textures.zip

165.67 KB , 吧幣: 200 , 請登陸后再進行下載！

立即下載

High_rises_random_paint.zip

414.18 KB , 吧幣: 200 , 請登陸后再進行下載！

立即下載

桌面.rar

4.09 KB , 吧幣: 200 , 請登陸后再進行下載！

立即下載

這是誰寫的插件?。≌玫?，謝謝樓主了！

原帖由 劉企 于 2009-4-16 20:40:00 發表
這是誰寫的插件啊！正要用的，謝謝樓主了！

:Z謝我就加分哈！

原帖由 劉企 于 2009-4-16 20:40:00 發表
這是誰寫的插件??！正要用的，謝謝樓主了！

:D:D
汗?。。∧氵@家伙，忘了給我上菜啦！

原帖由 劉企 于 2009-4-16 20:40:00 發表
這是誰寫的插件啊！正要用的，謝謝樓主了！

:D:D
汗！??！你這家伙，忘了給我上菜啦！

:D大概步驟，很簡單，自己看吧！
1、First, I made a 1Km x 1Km square, and divided it with SCF Toolbar'sGreeble several times. Then I Protruded it 100m with offset 4-12m.

2、I copied the upper faces and deleted the rest. Then I divided thosefaces even more and again, protruded them 100m with offset 1-3m, againkept only the upper faces and procedded to "random paint" them withGreen values from 10 through 110. Why Green? Because that's my favoritecolor.
    values: Green 10, Green 20, Green 30, etc., and in the second example Red 20, Red 40, Red 80.

3、I then proceeded to replace those colors with the 11 high-rise texturesI had downloaded from cgtextures.com (I had resized them to 12 pixelsheight (EDIT: 120 pixels) to keep the file manageable). I just used thepaint bucket + Shift. I am attaching that material library as a zipfile so anyone can use it.

4、I then made three concentric groups of those faces. To make the groups,I changed to a Top view, rotated 45 degrees and used right-to-leftmarquee and Right click > select > all connected. For the outerring, I used random push-pull 45/9m. I also re-pasted the faces fromthe first step and pushed them 20cm to act as sidewalks.

5、The middle ring was random pushed/pulled 90/18m, and after this graphic, the inner group was random PP 180/36m.

6、I then changed to Parallel projection > side view and carefullyselected all the roof faces with a left-to-right marquee. After that, I"random painted" them with Red values 20, 40 and 80.

7、Finally, I replaced those red colors with roof textures. I thenre-built the 1Km x 1Km square again to represent the streets. That'sit! Greeble City made possible thanks to your "Random Painter"!

詳細點咧.

留一個備用?。≈x！

一定要頂啊

:'-(下載這么多沒人頂，下次要設置權限才好！

好東西一定要頂！！  下了，但是不知道怎么用！

謝謝分享，先送上寶石，再來慢慢研究

先頂再下，謝謝分享！??！

很好，很強大

先頂再下，辛苦樓主。。。。

怎么個用法啊。。。

原帖由 Monster_Xu 于 2009-4-17 9:42:00 發表
怎么個用法啊。。。

:D多嘗試就會了！另外樓上有英文操作步驟，很簡單！

做人要厚道??！頂一個！:Z

40美元！~~~要頂頂

一定要頂啊 :D