podium矩陣點光源插件

is a ruby based program that will create a grid pattern of omni lights in your model. The goal is to create a uniform source of lights without using LEMs or without over-populating your model with omni lights. Select a face or several co-planar faces (such as a ceiling, wall or floor). Right click your mouse for the context menu. Select OmniGrid. Then select the grid distance from the dialog box and click OK. You can also Flip the Omni Grid if it does not display where you expect it. An Omni Grid group will be created. The group will be populated with the same component which contains a single omni group. The default light value of the omni group is 4 and color gray with opacity set at zero. You can change the light value and other properties of the entire grid, simply by changing the properties of one omni light in the grid. You can also move the omni grid position.
簡單的說，這就是個一個布置矩陣點光源的插件

登錄/注冊后可看大圖

本貼附件下載

OmniGrid.zip

31.22 KB , 吧幣: 200 , 請登陸后再進行下載！

立即下載

頂樓主?。。?br /> 謝謝~~~

放哪個文件夾？

原帖由 yuxinzhi12 于 2009-5-22 3:20:00 發表
放哪個文件夾？

通常是 plugin

我放置進去了，打開軟件沒看到，到底是怎么用啊，樓主是否可告知,多謝

謝謝分享??！:D

還要再研究研究·

podium的資源很少:-!
難得的插件謝謝!

下載了,然后放到插件中,可打開軟件在哪兒呢?沒看到什么呀.

頂樓主！收下了

放在plugin即可
接著對您想製做矩陣光源的面(face)
按滑鼠右鍵可看到"Greate OmniGrid "選項

確實布燈是個麻煩事

SU里自帶一個命令“X”，可以復制的
先選擇，用移動工具按住CTRL鍵復制一次，然后直接鍵盤輸入Xn，n就是你想復制的數量。
復制后，再選擇一行，可以再次復制

非常實用感謝樓主分享

SU里自帶一個命令“X”，可以復制的
先選擇，用移動工具按住CTRL鍵復制一次，然后直接鍵盤輸入Xn，n就是你 ...
onlyyong 發表于 2010-1-15 17:22

                               
登錄/注冊后可看大圖

是啊
哪位能解釋一下樓主發的插件和這樣操作有什么區別 ？:-_^

我有個問題想問問,為啥podium在對群組會出現選取失敗的情況的?

不會用，請樓主上詳細說明，謝謝哈

啊啊啊啊啊啊啊啊啊啊啊啊啊啊

有這東西~太好了~感謝大大分享