[已解決]SU8出問題了 ~~~~求救

登錄/注冊后可看大圖

安裝出現了這個問題啊，不知道是不是系統不兼容啊  本人WIN7旗艦版  好想要試試8啊  求高手解答！

另附系統配置圖

登錄/注冊后可看大圖

WO~~配置不錯啊。。。只不過這樣的配置才60G硬盤？？？？？？莫非我看錯了？？？?。。∥?T都不夠的說..=.=

回復 1789win00 的帖子

你是不是原來按過su的其他版本？建議及先刪除其他版本，再安裝8.0

另外你是不是安裝了云端版的一些軟件？先退出再安裝

回復 1024 的帖子

是的  我是安裝了云端  但是我關了再裝還是不行= =
重啟關了繼續裝也還是這個錯誤跳出來。。
這臺電腦里面沒安裝過SU

回復 Tyburn 的帖子

那個60G是固態硬盤  用作系統盤的
你說的不是重點。。

回復 1789win00 的帖子

800700EA,你可以查一下這個錯誤代碼的意思

對瘟期敬而遠之的飄過~
XP依然是王道

果然是固態硬盤,
我這里是320G液態硬盤,x64win7旗艦,
是不是某個運行庫缺失? 或者內存拔掉一根看看..

回復 heixing 的帖子

液態硬盤？真稀奇?。恳簯B(tài)軸承硬盤吧？就算是液態軸承這個技術也太老了了，現在早就是氣態懸浮軸承了

回復 1024 的帖子

登錄/注冊后可看大圖

之前那個用 FIXCLEANER修復好了  現在新問題又出現了= =真囧。。。

回復 1789win00 的帖子

查到一些資料，但是我好忙，沒細看，據說是能解決你先看看，有空我再研究

Welcome to Microsoft Answers!

Method 1:The System File Checker tool

To determine whether the issue that you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool scans system files and replaces incorrect versions of the system files by using the correct versions.

To run the System File Checker tool, follow these steps:

1.    Click Start, and then type cmd in the Start Search box.

2.    Right-click cmd in the Programs list, and then click Run as administrator. If you are prompted for an administrator password or confirmation, type your password or click Continue

3.    At the command prompt, the following line, and then press ENTER:

sfc /scannow

For more information visit the following link:

http://support.microsoft.com/kb/936212

Now you can try to perform the Windows update and check if the issue persists.


Method  2:
System resources, such as file data, registry data, and even in-memory data, can develop inconsistencies during the lifetime of the operating system. These inconsistencies might be caused by various hardware failures or might be caused by software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates not to work. The System Update Readiness Tool tries to resolve these inconsistencies.
After you download the System Update Readiness Tool, it runs a onetime scan for inconsistencies that might prevent future servicing operations. This scan typically takes less than 15 minutes to run. However, the tool might take significantly longer on some computers. The Windows Update progress bar is not updated during the scan, and progress seems to stop at 60% complete for some time. This behavior is expected. The scan is still running and you should not cancel the update.
For more information and to download the “System update readiness tool” visit the following link:
http://support.microsoft.com/kb/947821



Method  3: You may also try to perform a “Clean boot” and check if the issue persists.

NOTE: THIRD PARTY SOFTWARE DISCLAIMER
Using Third Party Software, including hardware drivers can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the use of Third Party Software can be solved. Using Third Party Software is at your own risk.


Clean boot:
Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We strongly recommend that you do not use the System Configuration utility to modify the advanced boot options on the computer unless a Microsoft support engineer directs you to do this. Doing this may make the computer unusable.
a.             Log on to the computer by using an account that has administrator rights.
b.    Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
c.     On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
d.    On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.

Note Following this step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points. Do not do this if you want to use the System Restore utility together with existing restore points.
e.    Click OK, and then click Restart.
Note: Reset the computer to start as usual
After you have finished troubleshooting, follow these steps to reset the computer to start as usual:
a.     Click Start, type msconfig.exe in the Start Search box, and then press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
b.            On the General tab, click the Normal Startup option, and then click OK.
c.     When you are prompted to restart the computer, click Restart.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/default.aspx/kb/929135


Method 4: Run the Windows Live Safety Center's 'Protection' scan in Safe
Mode with Networking, visiting the following link:

http://onecare.live.com/site/en-us/center/howsafe.htm

Let me know if this helped.
Regards,

Divya R – Microsoft Support.

Visit our Microsoft Answers Feedback Forum and let us know what you think.

回復 1024 的帖子

今天花了半天的時間  百度古狗了半天總算從無數實踐中找到了法子
經歷了國外的2款修復系統的軟件  然后再通過卸載了VC++2005和2008  
接著從新安裝以上那兩個數據庫，最后拿著軟件重新安裝到C盤一試  
居然成功了  刪掉以后繼續安裝到D盤  也成功了  接著再試了下安裝到了云端到破解到漢化 經重啟測試無礙   總算解決了以上問題

估計是我之前為了追求速度禁止了太多系統服務項目，然后有損系統的完整性和VC++的完整性所導致之前的原因= =！

不過解決了好高興 終于可以試試8了   謝謝版主的熱心解答 謝謝看完我的牢騷。。