跪求指導~~?。?/a>

本人新手，布置如何建立這種類型的屋面，求賜教。最好能告訴我用哪款插件，以及使用方法，謝啦~~

登錄/注冊后可看大圖

昨天剛發(fā)了一組教程，你搜一下。老怪寫的。

RE: 跪求指導~~?。?


It is a example, hopefully it is helpful. And slao you'd better to do some research in this bar, there are alot threads talking about how to build a curvy surface, like 老怪's threads.

登錄/注冊后可看大圖

1-draw 3d curves based on your design

登錄/注冊后可看大圖

2- use extrusion tools

登錄/注冊后可看大圖

3- extrude edge by rails

登錄/注冊后可看大圖

first, pick the profile
second, pick the first and second rails
then, pick the merge profile...
later on, you will get the surface. if there are any dialogs appears just select' no'

登錄/注冊后可看大圖

use soften edges to build nicel looking faces.

then, repeating  to get all  surface...


here is the plugins....


extrudeTools_20100517.zip (138.04 KB, 下載次數(shù): 47)

2011-3-17 00:01 上傳

點擊文件名下載附件

回復 對方所 的帖子

Thanks a lot~ I got it!~~
Another question is ,How to increasing the thickness of the roof by the "Extrude Tools"

That is SCF POWERNAR, see the attachment.

Next time, b4 you ask the questions, better to do some research, this is a quite nice bar and there are a lot infor. here.

Good luck!

SCF_Power_Toolbar_1.0.zip (333.25 KB, 下載次數(shù): 25)

2011-3-17 22:13 上傳

點擊文件名下載附件

SCF POWERBAR.

回復 對方所 的帖子

I have learnt it from the bar, but thank U all the same~

謝謝分享