加快vray for su渲染的插件

昨日在vray的官方論壇上尋找解決，vray for su7 渲染不兼容su平滑效果的解決辦法，發現了這個插件，自己本身沒有使用過，只知道一直一來vray for su 點擊渲染后有時候要有很長的等待時間，才開始真正進入渲染階段，而同樣在vray for rhino 里面，都是不需要任何等待的，有人發現這是因為vray進行su的渲染前要對材質進行內部處理，有時候很花時間(以前一個40M不到的文件花了20多分鐘，都以為死機了)因此他做了這個插件，此插件雖然名字里面有remove，但不會刪減任何材質，也不會改變材質坐標等，只是將材質重新連接到個組件或群組，理論上只會干擾到下次給同一物體換材質。
由于最近也沒有做什么復雜的設計，所以自己沒有先嘗試就先發過來跟大家分享了。
到現在為止此插件還沒有任何bug歷史，大家發現任何問題請在此貼留言。

綜合看了一下回帖，覺得有明顯提速的回答只占總數的一半。

另外大家知道解決vray渲染su7平滑面輪廓超明顯的問題請告知。
謝謝。

本貼附件下載

Remove_CG_mat.rar

883 Bytes , 吧幣: 200 , 請登陸后再進行下載！

立即下載

這個東西貌似還是很不錯的，拿回去試試，研究一下，吃個螃蟹什么的，哈哈。

我也頂一下.....看看是不是真的那么神奇.

怎么用的啊,,,怎么裝的.

聽起來很動人，麻煩有時間的朋友測試一下次插件是否有效。
如果是，這對VFS實際應用的意義將是重大的。

留貼，期待~~
VFS的渲染前期等待確實有點讓人難受~

樓主能把原始地址發來看看嘛？

原文
Title: Ruby Script for ALL VfSU users- Reduces Render Time
Post by: Jackson on November 28, 2008, 02:11:22 PM
Matthieu Noblet has very kindly spent many hours developing a free SU ruby script which will strip all materials assigned to groups and components and apply them instead directly to the geometry, which makes parsing SU files easier (and therefore much quicker) and more reliable for VfSU. After running this ruby script in SU some of my parse times dropped from as much as 20 minutes to less than 1 minute. The script will fix a smallish model (a villa, 100+ components, maybe 20 materials) in just a few seconds and a huge model (4sq kilometres of city, thousands of components, 50+ materials) in less than an hour (it's a one time fix for existing geometry and materials, so it's worth it for big models).

If any of you are not familiar with using SU ruby scripts, just download it and save it to the "Plugins" folder in your Google SketchUp program files. The next time you open SU it will be accessible under the "Plugins" menu under the name "Remove C-G Materials".

Four things to note:

Firstly, it DOES NOT DELETE any of your materials, it just reassigns them from the outside of groups and components to any geometry within that was assigned the default SU material. As such you won't actually see any difference in your model after running it, all UV mapping should be exactly as it was before.

Secondly, because of the very nature of the script you will no longer be able to apply materials to default elements of groups or multiple groups and components just by applying a material to them. It's a shame to lose this useful feature of SU modelling, but if you use VfSU often it's a very worthwhile sacrifice to make for a huge increase in speed and reliability.

Thirdly, it doesn't perform miracles- if your skp file is huge, with lots of materials and thousands of groups VfSU is still going to take quite a while to parse SU. What this ruby script really helps with is VfSU taking a long time just to parse even relatively small files.

Finally, as with all ruby scripts, this is not created, endorsed or tested by Google or ASGvis in any way and therefore you use at your own risk. Although many many users have been using it for months and have reported no problems or bugs, you run it at your own risk. If you're paranoid, "save as" your skp file before running it!

The ruby script can be downloaded here (http://rapidshare.com/files/216825604/Remove_CG_mat.rb//url).

If you'd like to say thanks to Matthieu for this very generous contribution to the VfSU community (he doesn't even use VfSU, which makes his generosity all the more remarkable) post here (http://www.sketchucation.com/for ... t&sd=a//url), he's a good guy and deserves some thanks!

Jackson

感謝樓主的共享！

有現實意義，持續關注

vary for su7跟6差別大嗎？

kankan

謝了

感謝

怎么用?。糠旁谀?？

安上了，沒有加快速度呢！

關注樓主的帖子，希望有人能試驗。

渲染前需要點擊。。。。。。。。。。。。。。。。。。。。。。。。

感謝樓主，下下來試試

裝完了  也顯示rome xx個材質

但似乎沒有變快   :'-(

不知是否漏了什麼步驟!